|
型号
|
规格代码
|
说明
|
|
ATE-E430A
|
|
绝对压力变送器
|
|
输出信号
|
-E····················
|
4～20mA，HART协议数字通讯（参见GS1C22T2-CY）
|
|
测量量程
（膜盒）
|
L..................................
M..................................
H..................................
V.................................
|
0.67～10kPa{5～75mmHg}abs
1.3～130kPa{9.6～960mmHg}abs
0.03～3MPa{0.3～30Kgf/cm2}abs
|
|
接液部分材质
|
S.................................
H.................................
M................................
T.................................
A····················
D····················
B····················
|
[本体][膜盒][排气螺钉]
SCS14A(注1)SUS316L(注2)SUS316
|
|
螺栓、螺母材质
|
0···················
1···················
2···················
3···················
4···················
5···················
|
[最大工作压力]
L膜盒M膜盒A膜盒
SCM43510kPaabs130kPaabs3MPaabs
{75mmHgabs}{960mmHgabs}{30kgf/cm2abs}
SUS63010kPaabs130kPaabs3MPaabs
{75mmHgabs}{960mmHgabs}{30kgf/cm2abs}
SUH66010kPaabs130kPaabs3MPaabs
|
|
安装方式
|
2··················
4··················
6··················
|
垂直安装，右面高压，过程接头在上（注3）
垂直安装，右面高压，过程接头在下（注3）垂直安装，左面高压，过程接头在上（注3）垂直安装，左面高压，过程接头在下（注3）水平安装，右面高压（注4）
水平安装，左面高压（注4）
|
|
接线口
|
-2·················
-3·················
-6·················
-7·················
-8·················
-9·················
|
G1/2内螺纹，1处接线口
1/2NPT内螺纹，2处接线口Pg13.5内螺纹，2处接线口
M20内螺纹，2处接线口
G1/2内螺纹，2处接线口，带一个盲塞
1/2NPT内螺纹，两个电气接口，一个盲塞Pg13.5内螺纹，两个电气接口，一个盲塞
M20内螺纹，两个电气接口，一个盲塞
|
|
显示表头
|
0·················
2·················
3·················
4·················
|
数字式表头
带设定按钮的数字表头
（无表头）
|
|
2-inch安装支架
|
G·················
H·················
J·················
D·················
E················
|
SECC平托架
SUS304平托架
SECCL型托架
SUS304L型托架
无安装支架
|